Sharkduino+ - Standard Camera Shield
Rev. 1.0
Questo modulo utilizza un sensore CMOS monocromatico con global shutter, pixel di 6x6 um e possibilitá di fare binning fino a 4x4.
Lo rende ideale per le misure automatiche e le misure di flusso luminoso.
Il modulo puó montare diversi adattatori per l'obiettivo: M12, M14, C, CS.
Utilizza con successo anche obiettivi motorizzati e con filtro IR attivabile da software.
In questa pagina trovate un esempio di come programmare questo modulo ...
This module uses a monochrome CMOS sensor with global shutter, 6x6 um pixels and the possibility of binning up to 4x4.
It makes it ideal for automatic measurements and luminous flux measurements.
The module can mount several lens adapters: M12, M14, C, CS.
It also successfully uses motorized lenses and with IR filter activated by software.
On this page you will find an example of how to program this module ...
| Optical format | 1/3-inch |
| Resolution | 752x488 |
| Pixel size | 6x6 um |
| Active Imager Size | 4.51(H) x 2.88 (V) 5.35mm diagonal |
| Filter array | Monochrome or (RGB Bayer on request) |
| Digitizing | 10 bit in linear mode, 12 bit in companded mode |
| Shutter Type | Global |
| Shutter efficiency | >99% |
Exposure time | 0.1 to 1100 mS |
| Frame Rate | 60 fps @ 752x480, 100 fps @ 376x240, 180 fps @ 188x120 |
| Dynamic Range | >55dB linear; >80dB-100dB in HDR mode |
| Responsivity | 4.8V/lux-sec (550nm) |
| Binning | 1x1, 2x2, 4x4 |
Region Of Interests | Arbitrary |
| Auto Exposure Control | Under software controls |
| Auto Gain Control | Under software controls |
| Thread |
 | ||
Available libraries on otStudio
otCamera
otCamera
With this simple app you can use our image grab and processing software