Blooming - OfficinaTurini

Go to content


The Blooming term means the behaviour of the sensor when the Full Well Capacity of the pixels is exceeded. In the standard CCD, when the pixels exceed the saturation and are filled too much , the charge in excess flows in the adjacent ones, typically above and below the same column, creating some stripes on the image.

Some types of sensors (code with suffix L) are equipped with an Antiblooming protection which prevents this behaviour, but they have a loss of FWC around 50% and the reduction of the fill-in. This allows the overexposition of the sensor avoiding the described effect.

However this option presents some disadvantages. Principally it drastically decreases the sensitive area of the single pixels (fill-in), therefore reducing the sensitivity of the whole sensor.


Il termine Blooming indica il comportamento del sensore quando viene superata la Full Well Capacity dei pixel. Nei CCD standard, quando i pixel superano la saturazione, cioe' si riempono troppo, la carica in eccesso si riversa in quelli adiacenti, tipicamente sopra e sotto nella stessa colonna, creando delle strisce bianche sull’immagine.

Alcuni tipi di sensori (codice con suffisso L) sono dotati di una protezione Antiblooming che impedisce questo comportamento, di contro hanno la perdita di circa il 50% della FWC e la riduzione del fill-in. Questo permette la sovraesposizione del sensore evitando l’effetto descritto.

Questa opzione presenta tuttavia degli svantaggi. Principalmente essa diminuisce drasticamente l’area sensibile dei singoli pixel (fill-in), riducendo quindi la sensibilità dell’intero sensore.

Free counters!
VAT: IT 02230330504
(C) 2016-2024 Officina Turini, Tutti i diritti riservati
Back to content