CORE-2 BF514/8 Minimodule - OfficinaTurini

Go to content
CORE-2 é un mini modulo basato sul BF514/8 di Analog Device, appartiene alla serie Blackfin e lavora ad una frequenza di clock di 400MHz ma grazie alla sua speciale architettura ha un benchmark di 800 MMACs.

Il modulo include una FLASH di BOOT (2MByte), la generazione del RESET, l'alimentazione del core, 64 MByte di SDRAM e 8 Gbyte di NAND (opzionale).

Tutto questo con un consumo molto ridotto, infatti tutta l'elettronica a 5VDC assorbe non piú di 100mA, meno di 0.5W!


CARATTERISTICHE
CORE-2 is a minimodule based on BF514/8 by Analog Device, belongs to the series  Blackfin and works at a clock frequency of 400MHz but given its special architecture is able to obtain a benchmark of 800 MMACs.

The module include BOOT FLASH (2Mbyte), RESET generation, core power supply, 64 MByte SDRAM and 8 Gbyte NAND (optional).

All this with very low power consumption, in fact the whole electronics at 5VDC absorbs no more than 100mA, less than 0.5W!

FEATURES
CORE-2
CPU
BF514 or BF518
Frequency
400MHz
RAM
SDRAM
64MByte
FLASH
2MByte
NAND
8 Gbyte
+3.3V Regulator
500mA
Power
0.5W / 0.7W with SDRAM active
Power Supply
+5V 5%
Per sviluppare un programma con CORE-2 é necessario conoscere il linguaggio C, ma non é necessario avere una profonda conoscenza del processore perché le molte librerie disponibili rendono facile costruire un completo progetto senza perdere tempo per studiare a fondo le caratteristiche.

Per sviluppare una propria applicazione é disponibile un ambiente integrato sotto mdi, dove grazie ad una applicazione dedicata (BFTC) si puó facilmente realizzare la propria applicazione con un minimo sforzo.

L'ambiente di sviluppo si basa sullo GNU toolchain. BFTC é un ide integrato con una GUI molto intuibile dove puoi editare il codice sorgente, impostare il DSP, compilare e collegare il codice ed infine caricarlo ed eseguirlo in RAM, FLASH o nella SDRAM.

CORE-2 ha un connettore JTAG che é pienamente compatibile con ICE100/1000B usato nel VisualDSP++ di Analog Device.

BFTC (Blackfin Toolchain) é completamente libero e tutti i sorgenti delle librerie sono inclusi.


To develop a program with CORE-2 you need to know the C language, but it is not necessary to have a thorough knowledge of the processor because of the many libraries available make it easy to carry out the project without necessarily to know in depth the processor.

In order to develop their own application was created a dedicated development environment within mdi, known for its extreme ease of use and to offer a very comfortable environment.

All of the development environment is based on the GNU Toolchain. BFTC is integrated in a modern IDE with an enhanced GUI where you can edit the source code or you can set up the DSP gates, compile/link your source code and finally  to load in RAM, FLASH or SDRAM memory the built binary.

CORE-2 with JTAG adapter is fully compatible with VisualDSP++ by Analog Device and with ICE100/1000B.

BFTC (BlackFin ToolChain) is completely free of charge and all the library sources are included.

User manual
Free counters!
VAT: IT 02230330504
(C) 2016-2024 Officina Turini, Tutti i diritti riservati
Back to content