|
Files |
| file | otSerial.h |
| | Serial Library for BF51x.
|
Modules |
| | Version History |
| | Serial - Code example |
Enumerations |
| enum | UartId { UART0,
UART1,
UART2,
UART3
} |
Functions |
| void | UartEnableSignals (int uart) |
| | Enable uart signals Set the related port to enable and expose uart signals (txd, rxd).
|
| void | UartSetBaud (int uart, int baudRate) |
| | Init serial port "uart" with specified baudRate. As default serial port is used as standard input/output.
printf and _scanf allow the access to this i/o channel.
Serial defaults are: 8 bit, no parity, one stop bit.
|
| void | UartPutChar (int uart, unsigned char c) |
| | Send a character on specified serial port.
|
| void | UartPutBytes (int uart, unsigned char *buf, unsigned int size) |
| | Send a buffer of bytes on serial port.
|
| void | UartPutString (int uart, const char *s) |
| | Send a C string on serial port.
|
| unsigned char | UartGetChar (int uart) |
| | Wait a character from serial port.
|
| unsigned char | UartChar (int uart) |
| | Read uart data register Read the uart data register without any controls.
|
| bool | UartCheckChar (int uart) |
| | Check if a character is available from serial port.
|
| void | UartReceiveService (int uart, int baudRate, void(*pCallback)()) |
| | Set interrupt handler for specific uart. Specify a C procedure used to handle a protocol on received characters from the serial port.
|