CORE-X BF514/518 Single board computer - OfficinaTurini

Go to content
CORE-X é una scheda che implementa un completo computer basato sul core BF514/8 di Analog Device, appartiene alla serie Blackfin e lavora ad una frequenza di clock di 400MHz ma grazie alla sua speciale architettura ha un benchmark di 800 MMACs.

Il modulo include una FLASH di BOOT (2MByte), 128 MByte di SDRAM, una interfaccia USB 3, un connettore per memorie Secure Digital, interfaccia LCD QVGA con gestione dello schermo tattile, sistema di misura inerziale e magnetico a 9 assi totali ed una interfaccia anologico digitale a 12 bit.

La scheda si alimenta con una batteria LiION (1S) oppure tramite un ingresso in continua a 5V. La batteria viene ricaricata dalla USB o dall'ingresso in continua.
CORE-X is a board that implements a complete computer based on BF514/8 by Analog Device, belongs to the series  Blackfin and works at a clock frequency of 400MHz but given its special architecture is able to obtain a benchmark of 800 MMACs.

The board includes a BOOT FLASH (2Mbyte), 128 MByte SDRAM, a USB 3 interface, a connector for Secure Digital memories, QVGA LCD interface with touch screen management, inertial and magnetic measurement system with 9 total axes and an interface 12-bit AD/DA.

The board is powered by a LiION battery (1S) or by a DC input to 5V. The battery is recharged by USB or DC input.
CARATTERISTICHE
FEATURES
CORE-X
CPU
BF514 or BF518
Frequency
400MHz
RAM
48+64+4 KByte @ 400MHz
SDRAM
128MByte (@133MHz)
FLASH
2MByte
SECURE DIGITAL
Full size up to 32 Gbyte, 5Mbyte/s with FAT32
USB-3Up to 180Mbyte/s
DISPLAY
QVGA 4Kcolors with TS (optional)
IMU
9 axys
ANALOG PORT
12bit 6 channel A/D or D/A 0-2.5V
PARALLEL PORT
37 I/O bit by a 125 Kgates FPGA placed on 133MHz core bus
Power Supply
LiION 1S or up to +15V
Per sviluppare un programma con CORE-X é necessario conoscere il linguaggio C, ma non é necessario avere una profonda conoscenza del processore perché le molte librerie disponibili rendono facile costruire un completo progetto senza perdere tempo per studiare a fondo le caratteristiche.

Per sviluppare una propria applicazione é disponibile un ambiente integrato sotto mdi, dove grazie ad una applicazione dedicata (BFTC) si puó facilmente realizzare la propria applicazione con un minimo sforzo.

L'ambiente di sviluppo si basa sullo GNU toolchain. BFTC é un ide integrato con una GUI molto intuibile dove puoi editare il codice sorgente, impostare il DSP, compilare e collegare il codice ed infine caricarlo ed eseguirlo in RAM, FLASH o nella SDRAM.

CORE-X ha un connettore JTAG che é pienamente compatibile con ICE100/1000B usato nel VisualDSP++ di Analog Device.

BFTC (Blackfin Toolchain) é completamente libero e tutti i sorgenti delle librerie sono inclusi.


To develop a program with CORE-X you need to know the C language, but it is not necessary to have a thorough knowledge of the processor because of the many libraries available make it easy to carry out the project without necessarily to know in depth the processor.

In order to develop their own application was created a dedicated development environment within mdi, known for its extreme ease of use and to offer a very comfortable environment.

All of the development environment is based on the GNU Toolchain. BFTC is integrated in a modern IDE with an enhanced GUI where you can edit the source code or you can set up the DSP gates, compile/link your source code and finally  to load in RAM, FLASH or SDRAM memory the built binary.

CORE-X with JTAG adapter is fully compatible with VisualDSP++ by Analog Device and with ICE100/1000B.

BFTC (BlackFin ToolChain) is completely free of charge and all the library sources are included.

User manual
Free counters!
VAT IT 02230330504
(C) 2016-2020 Officina Turini, Tutti i diritti riservati
Back to content